This article deals in detail with methods with which to glue a guitar fretboard to the guitar neck. Tools and materials are listed as well as necessary steps to take prior to beginning this operation.

Tools and Materials Required: Wood Chisels Japanese Pull Saw

Tools and Materials Required: Heel Restraint Jig Titebond III Glue Waxed Paper (4) Bessey or Large C Clamps Chop Saw or Table Saw Stationary Belt Sander or Drum Sander Amazon.com Widgets The Acoustic Guitar Heel: The Acoustic Guitar Heel consists of several stacked blocks of neck blank wood, glued up with specific grain orientation and [...]

Fitting the Acoustic Top: Learn how to expertly fit the most critical of guitar elements without introducing stress to the guitar. We will go through the necessary steps with you and list the tools and materials that are necessary to complete this job.

Installing Guitar Linings: If you haven’t already done so, be sure to read the articles Types of Guitar Linings and Making Guitar Linings. Installing the guitar linings is really the easiest part of the whole lining process. If you have done your job in making high quality lining, this section will be a breeze for [...]

Headstock Detailing Part 3 – Classical Guitar Source: Guitar Building Articles – The Guitar Neck Classical Guitar Headstock Detailing – Part 3: Required Tools and Materials: Woodworking Marking Knife Plexiglas Template Needle Files Wood Carvers Chisels 1/2″ Woodworker Chisel 1/4″ Woodworker Chisel Drill Press Drill Press Vice 1/4″ Milling Drill Scroll Saw Forstner Drill Bits [...]

Guitar Assembly Workboard in-Process Source: Tools and Materials Tools and Materials Required: 3/4″ Cabinet Grade Baltic Birch Plywood Guitar Template or Plan Outine Band Saw Cordless Drill Set of Drill Bits 1-1/2″ Stainless Steel Screws The Guitar Assembly Workboard: The Assembly workboard is another of the major tools or jigs that you will need to [...]