You are currently browsing comments. If you would like to return to the full story, you can read the full entry here: “Mortise & Tenon Neck Joint”.
Tags: guitar neck, guitar neck connections, guitar neck joint, mortise & tennon neck joint
One Response to “Mortise & Tenon Neck Joint”
Leave a Reply
Filled Under: Guitar Building Articles, The Guitar Neck
July 19th, 2010 at 8:28 pm
Hi Everyone,
I just updated this article with some needed information of marking and cutting the tenon portion of the neck joint. I want to stress the precision that is required to complete this step as it will certainly affect your setup later on with aligning the neck, both vertically and horizontally.
Good luck with this step and I will continue to add and improve articles as I improve the site.